NTS-6 is a motorized rotating torque tester that measures
rotating dynamic torque while turning test pieces. Check the rotating
torque, smoothness of rotation and components of small precision motors,
such as, gearbox, bearings, oil seals, etc. Torque data can be continuously
output via RS-232 enabling you to display a torque profile using data
acquisition software.
- Available in: lbf-in, ozf-in, Kgf-cm, N-cm and N-m
- Peak, Real Time and Continuous Output measuring modes
(selectable)
- RS-232C output n Both CW and CCW operation
- Programmable high/low setpoints for Go/No go testing
Warranty Information
| Model |
NTS-S1 |
NTS-S2 |
NTS-S5 |
| Capacity |
14.00 ozf-in |
28.00 ozf-in |
70.00 ozf-in |
Measuring range
(at the time of Track) |
3.0~100mNm |
3.0~200mNm |
0.030~0.5Nm |
| Max. Rotational Speed (no-load) |
85 rpm |
30 rpm |
13 rpm |
| Display |
4 digit LCD
display |
| Operation |
Both CW and
CCW motorized rotation |
| Measuring Modes |
PP: Peak Mode
displays PEAK torque value that will not change until a higher value is
measured.
GO: Real Time Mode displays TRANSIENT torque values.
RG: Output Torque Data every 1/100 seconds. |
| Measurement Start Time |
Can be set up
to 1 second in 0.1 second increments |
| Measuring Time |
Time can be
programmed between 1 and 20 seconds |
| Go/No go testing |
Programmable
High and Low values; Green lamp (OK solid, NG blinking) |
| External Input/Output |
Signal output
(open collector): Go and No Go
Data output: RS-232C (9600 baud) External start switch input |
| Data Memory |
400 data |
| Power Supply |
AC100V~240V |
| Bit Size |
4mm diameter |
| Indicator Dimensions |
165mm W ×
110mm D × 58mm H |
| Detector Dimensions |
28mm dia. × 155mm |
37mm dia. ×
195mm |